turn 2d drawing to 3d
concur.that.thought. Blog
Do you have a concept sketch that yous want to turn into a 3D Printed part? Read this guide to learn how to plow a simple second sketch, drawing, or image file into a 3D Printed part.
Learn how to turn your uncomplicated sketches into 3D Model files and 3D Printed parts.
If you tin can make a uncomplicated drawing, so yous can brand a 3D Printed part.
Getting from your sketch to a final 3D Printed role requires just one step in between: creating a 3D Model in STL file format. Run into this blog post to larn a little more near what 3D Model is, and why you need i in order to outset 3D Press.
This guide will walk you through how to transform your 2D sketch into a 3D Model file in STL format, and then how to employ the Hollywood 3D Press instant 3D Press quoting tools to order your 3D Prints online.
Step 1: Make your Sketch with Dimensions
In this guide, nosotros'll focus on turning this elementary 2D outline of an ballast into a 3D Printed part. This shape outline will be copied 1-to-1 in a 3D CAD program, and so assigned a thickness to turn it into a three-dimensional model.
Your drawing should have a basic outline of your part, with any of import dimensions included.
While this is a relatively bones task compared to the complex design geometry that 3D Printing is able to reproduce, it's nevertheless a foundational concept in 3D Pattern. Understanding how to turn a simple sketch outline into a 3D Model is the first step towards creating more detailed 3D shapes.
There are two things you want to make sure you have here: a sketch trace, and any dimensions that are important to your final part.
Sketch Trace: This is the outline of the part you'll exist creating. This can be drawn free-hand; lines don't have to be perfectly straight, and you don't need to be good at drawing circles. Luckily, the design tools covered in the next step of this article will accept care of this perfection for you.
Dimensions: Define the overall size of the item y'all'll be creating. For a 2d shape, this can be only one dimension such as the overall summit or width -- but if you have other areas where hole sizes or widths are important, yous can call these out too. For this anchor piece, we'll be focusing on only the overall height dimension to first. And then, when we're done creating our 3D Model, we can use a software measurement tool to cheque against the other dimensions written on the sketch.
Once you have your sketch ready, merely have a picture of it -- or scan it to an image file -- and then y'all're ready to start creating your 3D Model design.
Footstep 2: Creating a 3D Model from Your Sketch
If you lot're new to the earth of 3D Pattern software, creating a 3D Model from scratch may sound similar a daunting chore. While information technology's truthful that the 3D Design procedure can be a very in-depth process requiring skill and feel, you lot'll see here that the process of creating a 3D Model from a simple 2D sketch is quite elementary.
The first thing you'll need is a 3D Design program. We recommend Autodesk Fusion 360 because it's free to showtime and easy for beginners, but it is likewise an incredibly powerful platform that volition allow you lot to create only about anything you lot can imagine as y'all become more experienced in using the software.
While it might be more comfortable to apply a more basic lighweight blueprint tool, y'all'll give thanks yourself later for starting out with Fusion 360. Permit's jump correct in!
Depict a line defining your object height: When y'all launch Fusion 360, you'll have a new design open and ready. Press the "L" primal to draw a line. This volition kickoff prompt yous to select a sketch plane, so click whatsoever of the three options. We'll use the horizontal aeroplane for a nice top-down view. Click anywhere to place your outset point, and and then as you become to identify your 2nd indicate, yous'll meet a text box appear. Blazon your height dimension into this box, and hit Enter to describe the line.
Congratulations! Now you have a line that matches the height of the anchor in the cartoon. When you add your sketch paradigm in the next step, you'll have a visual assist to help you scale the prototype to match this height dimension.
Import your sketch paradigm: While even so in Sketch way, click Insert -> Canvas from the top tool menu, and select the image from your computer.
This will import your sketch into your CAD software, and so you tin can utilise the placement and sizing tools to get your image to exist the same height every bit the height line you lot drew in the previous pace.
When you've got your trace lined up with your acme line, click OK to go out the canvass import menu. At present you're set up to trace over your sketch and create a apartment profile of your shape in this 3D CAD software.
Trace the image: To trace this epitome, we'll use the Circle tool, Line tool, and Fit-Point Spline tool. Nosotros beginning off with the Circle tool, and place the centre points in the center of the round areas, and describe the circles out until they overlap with the drawing.
Utilise the line tool to trace over the straight areas of the drawing, and the Fit-Signal Spline tool to place points along the areas of the cartoon which have curvature. The Fit-Signal Spline tool will create a curve which traces along the points yous place ane-by-ane.
Since this is an object with symmetry along the vertical centrality, meaning that it looks the same on the left one-half equally it does on the correct half, then we tin can save ourselves some fourth dimension by mirroring the sketch across a vertical axis. Once you trace the left half of the drawing, y'all can use the Mirror tool to create that sketch geometry flipped over on the right axis.
After selecting and mirroring the left-half geometry we traced manually using the Circle, Line, and Fit-Point Spline tools, nosotros now take a full trace of our drawing. At present it's time to create a solid three-dimensional object from this sketch geometry, using the Extrude tool.
Extrude the sketch geometry: Select the Extrude tool, and click all of the closed sketch faces that you want to give a thickness to, and blazon in the thickness you want them to be. We desire this part to be 10mm thick, and then we type in 10mm into the Extrude tool box later on selecting the sketch faces, and this gives u.s. our final 3D Model of our ballast.
At present you accept completed the process of creating a 3D Model file from your sketch. We just need to save it off in the right format for 3D Printing.
Saving as an STL file: From the Bodies section in the model tree on the left of the pattern expanse, right-click the model body, and select Save as STL. Proper name your file, and click Save. Now yous're ready to 3D Print this STL file.
Step 3: 3D Printing Your STL File
The hardest part is over -- once you take your STL file, getting a 3D Print is elementary.
When you create a user business relationship at Hollywood 3D Press, you get ten% off your commencement online 3D Press order. You also get free admission to a suite of helpful online 3D tools.
On sign-in to your Hollywood 3D Printing user business relationship, you're directed to a blank new quote which is ready for uploading your 3D Model files in STL, OBJ, STEP, or IGES file format. This is where we're going to be uploading the STL file created in the previous stride of this guide.
When you sign in to your user account, you're directed to a bare New Quote. This is where you lot tin can upload 3D Model files and get an automated 3D Printing quote and society parts online.
To social club a 3D Print of your 3D Model file, but drag+drop your STL file over the upload icon in this window, and it will announced as a new Line Detail in your automatic online 3D Press quote.
Once your 3D Model appears as a new line item in this 3D Printing quote, you can click the "Generate Cost" button. This step is where our online 3D software analyzes your 3D Model file, and determines the size of your part, how long it takes to 3D Impress, and the volume of material required by the function. Based on this data, you will see a quoted price to 3D Print your 3D Model.
Later adding a 3D Model file to your automatic quote, y'all will see a "Generate Price" push button appear. Click this button, and our online 3D software will clarify your 3D Model file and generate a 3D Printing price.
Forth with this pricing information will be the dimensional size of your 3D Model. If the default choice for the 3D Model dimension units is not correct, you can alter your units by clicking "mm", "cm", or "in" in the Fix Units section, and you will encounter your dimensions update.
In addition to changing the dimension units, you can select your build material option, and change the quantity of your society if you're looking for more than but ane part.
Upon generating a price, your 3D Printing quote will include a thumbnail image of your part, and a link to view your 3D Model in the online 3D viewer software.
From here, you are gear up to go along to checkout, and your 3D Printed part will send to yous within a thing of days.
Cheers for reading this guide! If you got this far, hopefully you now empathise how to go from a simple 2nd sketch to a finished 3D Printed part. Nosotros wait forward to condign your trusted 3D Press partner.
Get Inspired
Browse through hundreds of examples of our 3D printing, 3D design, and custom fabricated builds.
Source: https://hollywood3dprinting.com/blog/how-to-3d-print-from-a-sketch-drawing-or-image
0 Response to "turn 2d drawing to 3d"
Post a Comment